Installing Cleanouts / Cleaning Eyes.

22 April 2024

Cleanouts, also known as Cleaning Eyes, Rodding Eyes or Inspection Points, are essential to modern drainage systems. These plumbing devices provide access for inspection, maintenance, and cleaning of drainage pipes, helping to prevent blockages and ensure proper system function.

Installation Process

The installation of cleanouts eyes involves several key steps:
1. Location selection: Cleanouts should be installed at strategic points in the drainage system, typically every 15 - 20 meters along pipe runs. They are particularly important near changes in direction, at the base of soil stacks, and where pipe access is restricted.

2. Compatibility check: Ensure all components are compatible before installation and assemble them to a verify proper fit.

3. Height adjustment: Position the cleanout so that its upper part sits approximately 1-1.5 mm below the floor level when concrete is poured.
4. Connection to pipework: Attach the body of the cleanout to the drainage pipe, using connectors or adapters if necessary. Ensure a secure fit to prevent leaks.
5. Sealing: Install the cover with a gasket or O-ring to create an airtight seal, preventing odours and debris from entering or escaping the pipe system. 

Types and Materials

Cleanouts are available in various designs to suit different applications:
Materials: Typically manufactured from austenitic stainless-steel grades 304 or 316L for corrosion resistance, hardness and strength.
Cover lid types: Smooth or checker plate (anti-slip) options are available.
• Sizes: Available for drainpipes with diameters typically ranging from 80mm to 225mm. 

Importance in Drainage Systems

Cleanouts play a crucial role in maintaining drainage systems:
• They allow for quick access to underfloor areas for inspection and cleaning.
• They help meet building codes and standards, which require fully maintainable cavity drainage systems.
• Regular cleaning through these access points helps prevent blockages and maintain system performance.

Property owners can ensure the longevity and efficiency of their drainage systems by following proper installation procedures and regularly maintaining cleanouts eyes.

Examples of Cleanouts/Cleaning Eyes, Rodding Eyes  

  • Top Left              Metabronze CE662 - 150mm Rodding Eye
  • Left                     Metabronze CE661 - 100mm Rodding Eye
  • Bottom Left       Metabronze CE661 - 100mm Rodding Eye - Non-skid lid
  • Middle                SPS R200/150SR4  - 200mm round Cleanout - 150mm outlet
  • Top Right           SPS R200/150SCRN - 200mm round Cleanout - 150mm outlet 
  • Right                  SPS R130SCRN          - 130mm round Cleanout - 100mm outlet
  • Lower Right      SPS R150SCR            - 150mm round Cleanout - 100mm outlet





Useful Product Articles

Competitiveness

We are committed to keeping our customers competitive without sacrificing quality or service

Architects and Specifiers