150mm Retro Fit Bucket Trap
The retro fit bucket trap comes in a cast gunmetal bronze finish. This unit is suitable for fitting into precast concrete or timber flooring. The bucket trap can be used with or without a membrane. The female BSP thread allows for height adjustment to a variety of upper units (refer to optional extras).
DIMENSIONAL DATA
|
DIMENSIONS |
|||||
| NB | A | B | C | D | E |
| 150mm | 245 | 30 | 70 | 100 | 160 |
| Key: BR = Bronze, AB2BR = AB2 Bronze, S/S = Stainless Steel, CI = Cast Iron, NB = Nickel Bronze | |
|---|---|
| COMPONENTRY TABLE (Part Numbers) | |
| Outlet size (mm) | 150mm |
| Retro Fit Bucket Trap (BR) | RW890 |
| OPTIONAL EXTRAS FOR 150mm RETRO FIT BUCKET TRAP | |
| Outlet Size | 150mm |
| Hub Coupling Ring | RW897 |
| Clamp Ring (BR) | RW909 |
| 150mm Low Grime (CP) | RW842 |
| 150mm Low Grime (S/S) | RW970 |
| 200mm Square Vari Level Drain (S/S) | RW992 |
| 225mm Square Vari Level Drain (NB) | RW889 |
| 225mm Square Vari Level Drain (AB2BR) | RW913 |
| 225mm Square Vari Level Drain (S/S) | RW987 |
| 225mm Round Vari Level Drain (S/S) | RW993 |
| Stainless Steel Sediment Basket | RW895 |
| AVAILABLE IN THE FOLLOWING OUTLET SIZES | |
| Nominal Bore Size | 150mm |
| Suitable for brazing to Copper | Yes |
| Suitable for fitting to PVC | Yes |
