Hytop Vertical Flat Grate

Optional Extras

                      

Hub Coupling               Compact 90° Elbow

Cast bronze floor or roof outlet with non-tilt heavy duty grate for vertical discharge. Bronze is suitable for fitting to PVC pipe, or for brazing to copper. Also available in a dome grate.

TYPICAL APPLICATION

Traffic able areas such as Car Parks and Multi Level Car Park buildings

DIMENSIONAL DATA

 

DIMENSIONS
NBABCDE
50mm183117752570
80mm220150852083
100mm2702001102595
150mm2852201602590
* Free grate area to pipe on ratio 1:7:1

Key: BR = Bronze
COMPONENTRY TABLES (Part Numbers)
Outlet size (mm)50mm80mm100mm150mm
Flat Grate (BR)RW869RW870RW871RW872
Body (BR)RW861RW862RW863RW864
Fastening BoltRW833RW833RW833RW833
COMPLETE UNITS (BODY & FLAT GRATE)
Outlet Size50mm80mm100mm150mm
Body = (BR), Flat Grate = (BR)RW855RW856RW857RW858
OPTIONAL EXTRAS FOR VERTICAL HYTOPS (Part Numbers)
Outlet Sizes50mm80mm100mm150mm
Hub CouplingRW898RW896RW897
Compact 90° Elbow RW919
AVAILABLE IN THE FOLLOWING OUTLET SIZES
Nominal Bore Size 50mm80mm100mm150mm
Suitable for brazing to Copper Yes Yes Yes Yes
Suitable for fitting to PVC *FBSP Yes Yes Yes

* 50mm outlets can have a standard female BSP thread machined to the spigot at the time of order. This enables a PVC adaptor to be fitted to the outlet.