Hytop Vertical Dome Grate

Optional Extras

                 

Hub Coupling     Compact 90° Elbow

 

Cast bronze floor or roof outlet with non-tilt heavy duty grate for vertical discharge. Bronze is suitable for fitting to PVC pipe, or for brazing to copper. Also available in a flat grate.

TYPICAL APPLICATION

DIMENSIONAL DATA

DIMENSIONS
NBABCDEF
50mm183117752570110
80mm220150852083135
100mm2702001102595165
150mm2852201602590190
* Free grate area to pipe on ratio 1:7:1

EXPLODED VIEW

Key: BR = Bronze
COMPONENTRY TABLES (Part Numbers)
Outlet size (mm)50mm80mm100mm150mm
Dome Grate (BR)RW820RW821RW822RW823
Body (BR)RW861RW862RW863RW864
Fastening Bolt RW834 RW834 RW834RW835
COMPLETE UNITS (BODY & DOME GRATE)
Outlet Size50mm80mm100mm150mm
Body = (BR), Dome Grate = (BR)RW851RW852RW853RW854
OPTIONAL EXTRAS FOR VERTICAL HYTOPS (Part Numbers)
Outlet Sizes50mm80mm100mm150mm
Hub CouplingRW898RW896RW897
Compact 90° Elbow RW919
AVAILABLE IN THE FOLLOWING OUTLET SIZES
Nominal Bore Size 50mm80mm100mm150mm
Suitable for brazing to Copper Yes Yes Yes Yes
Suitable for fitting to PVC *FBSP Yes Yes Yes

* 50mm outlets can have a standard female BSP thread machined to the spigot at the time of order. This enables a PVC adaptor to be fitted to the outlet.